1/64 Scale Custom Adjustable BULK AXLES Real Riderz Wheels Rims Tire Hot Wheelz

$8.99 Buy It Now or Best Offer
free,30-Day Returns

Seller Store mod_my_ride
(8393) 99.6%,

Location: Bakersfield, California
Ships to: US,
Item: 195538015352

All returns accepted:ReturnsNotAccepted
Return policy details:
MMR:MMR
Scale:1:64
Series:Hot Wheels Real Riders

Make any 1/64 scale wheels fit any 1/64 scale car easily with custom adjustable axles!.If the stock axles are too short or long, you’ll need custom axles like these!.Simply bend the axle pin tips a tiny bit with pliers and insert into tubes.The friction from the bend will hold the pin in place, no need for glue.Glue is permanent, bending isn’t. .If the axle pin is too hard to push in, you’ve bent it too much so just unbend it a bit.If the axle pin is sliding out on its own, you need to bend it some more..SIZE Recomendations:All sizes work on Hot Wheels, Matchbox, and possibly other 1/64 scale diecast brands. Only the length changes.The size you need varies alot on the wheels (deep dish vs regular), base of car (this varies), and fitment desired (regular vs tucked vs past fender).-Short: Kool Kombi, Tooned Cars, Very Deep Dish wheels, wheels tucked in behind fenders like on lowriders/slammed cars/trucks.–Medium: Normal Wheels on most cars or Slight Deep Dish.—Long: Widebody cars with non deep dish wheels, Offroad trucks with non deep dish wheels or wide stance (tires sticking out alot past fenders).Long is the safest bet as you can always trim with dremel disc is needed, but i recommend having all sizes in your toolbox to make things easier/faster :).—>Buy Individual Axle Sets: https://www.ebay.com/itm/193986557332 ————————————————————————————————————————————————————————-HOW TO INSTALL: Drill method:1) Drill out base rivets with roughly a 9/64″ drill bit.2) Take car apart.3) Pry open / remove base tabs holding in original wheel axles.—for plastic bases, you can easily pry them open with small flathead screwdriver, or just snap them off with blade/wire cutters.—for metal bases, you may be able to snap them off with wire cutters (careful as this will send the tab flying across the room!) if you cannot remove the tab entirely, you will need to use dremel disc to grind off the rest of tab. —if you don’t care about the stock wheels/axles, you can also just bend them out to easily cut the axle with wire cutters4) Replace wheels/axles—if the custom wheels don’t fit because axle is too short/long, you will need to adjust custom axle sets, see below.5) Reassemble car.—If you didn’t overdrill, the base might just snap back together, otherwise you will need to lay car on it’s roof and add some super glue onto the posts where the rivets used to be, or use some epoxy putty.Optional: Lower car’s ride height by sanding down the interior that holds the axles.No Drill method:1) Cut stock axles with wire cutter.—you may need to bend the axles down to have room to cut them2) Use custom axles: —1. Bend axle pins about 10-15 Degrees with pliers—2. Insert bent pin into axle tube (if it won’t go in, you’ve bent it too much, unbend a bit and try again, if it slides out too easily, bend it more)—3. Insert 1 wheel into axle tube—4. Feed axle tube with wheel through car’s base—5. Insert another wheel into axle tube on the other side of car/axle—6. Insert bent axle pin into axle tube to lock in the wheels3) Adjust as needed.—if axle tube is too long: uninstall axle and trim with dremel disc and try again—if axle tube is too short (rare): pull out axle pins slightly—if there is play in the wheels, add spacers to fill in the gaps from wheel to base (you can make your own or use my 3D printed spacers for an easier time)Note: if you don’t use drill to open car, you can’t lower the car’s ride height.————————————————————————————————————————————————————————-Be sure to check out my other listings such as:-Real Riders 1/64 Scale Wheels and Tires-Headlight and Taillight Decals-Universal Liveries-Universal Wraps-Carbon Fiber Wrap-Side View Mirrors-Spacers ————————————————————————————————————————————————————————- SHIPPING INFO:All are flat rates, meaning it doesn’t matter how many items you buy, shipping price will be the same 🙂 For decals, axles, and/or spacers only!USA: $3.99 First Class Package with trackingInternational: $3.99 First Class Envelope without tracking For wheels, decals, axles, and/or spacers!USA: $4.99Canada: $9.99International: $12.99 If your total shipping cost is higher than above, click ‘Request Total’ in your cart so I can fix shipping cost.If not possible, no worries, I will refund any extra shipping costs paid for :)————————————————————————————————————————————————————————- Follow me on Social Media for updates on Restocks and New Releases!Any questions, feel free to ask 🙂

Frequently Asked Questions About 1/64 Scale Custom Adjustable BULK AXLES Real Riderz Wheels Rims Tire Hot Wheelz in My Website

digitalmarketgame.com is the best online shopping platform where you can buy 1/64 Scale Custom Adjustable BULK AXLES Real Riderz Wheels Rims Tire Hot Wheelz from renowned brand(s). digitalmarketgame.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling 1/64 Scale Custom Adjustable BULK AXLES Real Riderz Wheels Rims Tire Hot Wheelz on digitalmarketgame.com?

Frequently Asked Questions About 1/64 Scale Custom Adjustable BULK AXLES Real Riderz Wheels Rims Tire Hot Wheelz in My Website

What are the best-selling 1/64 Scale Custom Adjustable BULK AXLES Real Riderz Wheels Rims Tire Hot Wheelz on digitalmarketgame.com?

Leave a Reply Cancel reply