LAUNCH X431 Pros Elite V+ Pro3S+ Bidirectional Car Diagnostic Scanner Key Coding

LAUNCH X431 PROS ELITE Performs Advanced Resets/Calibrations/Routine Tests for 10000+ Car Models

LAUNCH X431 PROS ELITE obd2 scanner diagnostic tool features an extremely higher depth of support in car coverage and maintenance coverage than its rivals. When it comes to coverage, LAUNCH car scanner serves global 99% of vehicles and brings regular upgrades for 1996-2023 cars, even 2024 cars included. As to its reset functions, LAUNCH scanner combines 32+ maintenance functions that are far more than the same-cost scan tools with limited 10-20 functions. Providing a no-hassle service menu & fix cases empowers users to quickly start diagnostics & repair.

• Oil Maintenance Reset: Reset the oil life system and turn off the oil light to start a new cycle.
• Brake Reset: Use the LAUNCH scanner to reset the brake pad in the following cases: a) the brake pad and brake pad sensor are replaced; b) the brake pad indicator lamp is on; c) the brake pad sensor circuit is in short-circuit; etc.
• Immobilizer Reset: Disable the lost k~eys and add new k~eys & remote control for vehicles with low-grade anti-theft systems.
• Steering Angle Reset: Reset the steering angle to zero to keep the car running straight.
• TPMS Reset Database: Relearn the tire pressure sensor ID with the vehicle after replacement.
• Battery Matching: Re-match the battery control module and motoring sensor.
• Adblue Reset: Reset urea is needed after replacing or filling diesel exhaust fluid (vehicle urea).
• Air / F~uel Reset: Reset urea after the diesel exhaust treatment fluid is replaced or filled up.
• NOX Sensor Reset: Reset catalytic converter learned value stored in ECU.
• Sunroof Reset: Reset sunroof lo~cking & closing, closing on rainy days, slide/tilt sunroof memory function, outside temperature threshold, etc.
• ABS Bleeding: Vent the air of a brake system to restore ABS brake sensitivity. 
• Throttle Matching: Initialize the throttle actuators to the default state.
• Headlamp Reset: Initialize the adaptive headlamp system.
• Injector Coding: Code the injector after replacing or adjusting it to correct the f~uel injection volume of each cylinder more accurately. 
• Seat Calibration: Calibrate the memory in replaced or repaired seats.
• Windows Calibration: Perform door window matching to recover ECU initial memory.
• Electrical Throttle Relearn, D-P-F Regeneration, Air Level Calibration, Crank Position Sensor Adaptive Learning, Gearbox Relearn, Language Change, Tire Reset, Windows Calibration, etc.

LAUNCH Scanner: Scan All Available Systems And Troubleshoot All Troubles In Ultra Speed

All System Scan: Unlike other comparable diagnostic tools, LAUNCH X431 PROS ELITE scanner for car empowers the auto repair shops/workshops to perform the same level of diagnosis, analysis, and maintenance as the OEM dealer. LAUNCH scanner also deeply scans all available systems including Engine, AT, ABS, SRS, EPB, IMMO, TPMS, Doors, Gateway, Air Conditioning System, Steering Angle System, Air Suspension System, etc., and does more accurate diagnostics for more car models with faster efficiency.

• Read Codes: Find out all the DTCs and provide convenience for diagnostics & maintenance.
• Clear Codes: After certain repairs have been carried out, you can use this function to erase the codes easily.
• View Live Data: Help you view the instantaneous changes in the car’s systems and detect possible problems.
• View ECU Information: Retrieve ECU information of unit type, version number, and other specifications.
• Active Test: Send commands to ECUs and judge where the problem is.
• Auto VIN: Access the VIN code automatically instead of inputting manually.

Bidirectional Control (Active Test): LAUNCH bi-directional scan tool can send commands directly to vehicle modules and perform various active tests to accurately figure out whether a specific system, component, or subsystem in certain parts goes well or not, without using the vehicle controls. 

With no active tests, you would have to tear your car into parts to locate possible problems and even replace many auto parts until you stumble upon the one you need to diagnose.

With active tests, you can easily check many modules such as compressors, clutches, mirrors, windows, sunroofs, doors, car l~ocks, etc., and pinpoint car problems in minutes. More examples of active tests are as follows: A/C compressor clutch relay, Active grille air shutter system, Auto start/stop, Camshaft position actuator system, Compression test, Cooling fan on/off, Engine controls ignition relay, Engine speed/throttle on/off, EVAP emission system, F~uel control loop status, Close/Open f~uel system, etc

Note: Active tests vary by model. You can check compatibility by messaging us.

10000+ Car Coverage, Serve Global 99%+ Cars And Boost All Repair Shops

Do you want to have an OE-level scanner for car to flourish your repair business? Try to use this LAUNCH scan tool that features superior hardware configuration providing 5x faster speed and covers 99% of worldwide vehicles made in 1996-2023 counting 100+ brands & 10000+ models. With the support of CAN FD & DOIP & FCA Vehicle Access, this LAUNCH X431 PROS ELITE automotive scanner can diagnose more vehicles without limitation and more feature vehicles, never be out-of-date.

• Superior Configuration, More Memory, Faster Connection: LAUNCH X431 PROS ELITE is based on Android 10.0 OS and 2.0 GHz 4-Core CPU, with 4GB RAM & 64GB ROM, operating faster diagnostics speed and obtaining large data & graphs without any slow logging. Larger 8” touchscreen makes it easier to read and more intuitive to view live data. 6000mAh rechargeable battery works for longer 15+ hours of use. 2.4 & 5GHz WiFi even accelerates whole data transfer during the diagnostic process & gives great convenience for one-click fast software updates.
• Wider 99% of Car Coverage, More 100+ Brands & 10000+ Models: Compatible with OBD2/EOBD/CAN FD/DoIP protocols, LAUNCH escaner automotriz professional widely works with passenger car, pickup, and light-duty truck, SUV, gasoline, minivans, ranged from American-made cars [for Ford, Lincoln, Chrysler, Dodge, Jeep, GM, Cadillac, Chevrolet, Buick, GMC, etc.] to Asian-made cars [for Acura, Lexus, Suzuki, Mitsubishi, Mazda, Kia, Isuzu, Infiniti, Hyundai, Honda, etc.] to European-made cars [for VW, Seat, Skoda, Peugeot, Citroen, Renault, Volvo, Vauxhall, Smart, Rolls-Royce, Porsche, Mini, Maybach, BMW, Jaguar, Fiat, Ferrari, Dacia, Citroen, Bugatti, Benz, Bentley, Au~di, etc.]
• More Protocol Support, Diagnose More Vehicles: No need to buy any adapters. LAUNCH X431 PROS ELITE is compatible with CAN FD & DoIP which not only improves diagnostic speed on more models such as GM, BMW, Volvo, Land Rover, Jaguar, etc. but also not out-of-date for future new models. Freeing from Gateway limitation, this LAUNCH bi-directional scanner can help (no charge) to login the FCA account successfully and open more gateways to securely operate bi-directional tests, clearing fault codes, SAS calibrations, etc., for Fiat, Chrysler, Alfa Romeo, etc.