289-302 FORD POWER STEERING SAGINAW PUMP BRACKET KIT – ALUMINUM WATER PUMP –

289-302 FORD POWER STEERING SAGINAW PUMP BRACKET KIT - ALUMINUM WATER PUMP -

$98.28 Buy It Now or Best Offer
free,30-Day Returns

Seller Store revmax-streetrods
(5161) 99.0%,

Location: Garden Valley, California
Ships to: US,
Item: 173630860401

Restocking Fee:No
Return shipping will be paid by:Buyer
Returns Accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
Placement on Vehicle:Left,Front
Surface Finish:Brushed Finish
Manufacturer Warranty:Yes
Part Brand:Revmax-Streetrods
Country of Manufacture:United States
Vintage Part:Yes

RevMax-Streetrods 289 – 302 Ford Power Steering Pump Bracket Kit For sale is a New Bracket Kit to mount a Saginaw Power Steering Pump on your 289-302 Ford motor. This Mounting Bracket has been designed to use a newer style Aluminum Water Pump and a V-Belt. It will position a Saginaw style Power Steering Pump on the drivers side of your Small Block Ford motor. This is a very solid design that will not flex and will hold your belt in alignment when tightened. This will fit on most late 60?s thru 1980 engines that use a 4 bolt Crank pulley and have the water pump inlet on the drivers side of the motor. The Power Steering pulley is aligned with the 2nd groove (counting from the harmonic balancer out) of a stock V-Belt pulley. The water pump pulley must have a narrow “nose” for the belt to clear (see photos) The Alternator belt uses the 1st groove of the crank pulley. (closest to the harmonic balancer) Our brackets have a brushed satin finish. This kit includes all hardware to complete your installation. We have made every effort to simplify this installation for you: The bolts have flange heads to prevent the washers from falling off during installation, and we have pressed in nut inserts on both brackets, so you won’t have to fumble with holding everything while installing the mounting bolts. We designed this as if we were going to install it ourselves! This bracket kit uses the (2) 7/16-14 threaded holes in the front of the head. (See Photos) and (2) 5/16″ Water pump mounting bolts (See Photos) These brackets are machined from 3/8″ thick 6061-T6 Billet aluminum manufactured by Alcoa Aluminum in the USA. *** Price Includes Free shipping anywhere in the U.S.A. *** Saginaw Power Steering Pumps: Do I need a power steering pump with a press fit pulley or a pump that has a keyed and threaded shaft? You will find that a pump with the keyed/threaded shaft will be much easier to work with. The pulley can be easily removed for installation of the PS Pump. The pumps with a Keyed /threaded shaft were used from the mid 60?s into the late 70?s depending on the vehicle. In the 60?s the pump housing had an oval shaped fill tube. By 1970 they had changed over to the more common banjo design. GM started changing over to the press fit pulley in the mid 70?s.. Later GM changed to a ?metric? pump. The mounting holes are in the same location, but the hydraulic fittings have metric threads. All styles have the same mounting holes and are interchangeable for the purposes of mounting with our brackets. There are differences in the location and shape of the return tube for the various car models, and a few trucks with hydroboost had a dual return. There are a few pumps that have a slightly different location for one of the mounting holes. These are not very common, but to make sure your pump will fit our bracket: measure the hole to hole spacing on the 2 holes that are used to mount the pump. It should be 3.79? center to center (just over 3 ¾?) If you happen to have a non-standard pump, it would be about 3 ½?. You may want to just buy a rebuilt pump that will fit. (less than $50) The pump shown in the photo is for a ?70 Camaro with a 350. Very easy to obtain at your local parts store. Guaranteed to fit! The Power steering pulley is either a Small Block or Big Block Chevy – they are the same) Installation of our bracket kits requires a competent mechanic. Our Bracket kits typically cover more than a 20 year span of engine and car models. We strive for a perfect fit, but with differences in blocks, heads, aftermarket parts, alternators, power steering pumps, harmonic balancers, etc. it may not be possible to get a perfect fit 100% of the time. If for any reason your kit does not fit perfectly, contact us before damaging, or forcing anything. We have selected bolts and spacers for our kits that should work 99% of the time? but there may be situations where you need a custom bolt or spacer. We will be happy to supply those for you to ensure a perfect fit.

Frequently Asked Questions About 289-302 FORD POWER STEERING SAGINAW PUMP BRACKET KIT – ALUMINUM WATER PUMP – in My Website

digitalmarketgame.com is the best online shopping platform where you can buy 289-302 FORD POWER STEERING SAGINAW PUMP BRACKET KIT – ALUMINUM WATER PUMP – from renowned brand(s). digitalmarketgame.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling 289-302 FORD POWER STEERING SAGINAW PUMP BRACKET KIT – ALUMINUM WATER PUMP – on digitalmarketgame.com?

Frequently Asked Questions About 289-302 FORD POWER STEERING SAGINAW PUMP BRACKET KIT – ALUMINUM WATER PUMP – in My Website

What are the best-selling 289-302 FORD POWER STEERING SAGINAW PUMP BRACKET KIT – ALUMINUM WATER PUMP – on digitalmarketgame.com?

Leave a Reply Cancel reply