Sherline 2.5 Inch 4 Jaw Chuck (Independent) 3/4 x 16 Thread 1044

$153.21 Buy It Now or Best Offer
free,30-Day Returns

Seller Store zaydajones
(9463) 99.3%,

Location: Brooklyn, New York
Ships to: US,
Item: 303783561382

All returns accepted:ReturnsNotAccepted
Return policy details:
Does not apply:Does not apply

Sherline 2.5 Inch 4 Jaw Chuck (Independent) 3/4 x 16 Thread 1044 Sherline 2.5 Inch 4 Jaw Chuck (Independent) 3/4 x 16 Thread 1044 4 Jaw Chuck (Independent) Four-jaw chucks have four advantages over three-jaw chucks. Useful for holding irregularly shaped parts With the use of a dial indicator, center parts with a great deal of accuracy Useful for deliberately holding a part off-center They can clamp stock tighter This is a valuable asset when machining cams, crankshafts, and similar parts. The main disadvantage of the 4-jaw independent chuck is that the jaws must be individually set, adding considerable time to setups. Like the Sherline 3-jaw chucks, the 4-jaw chucks can be used to clamp either externally or internally. Although we recommend the 3-jaw chuck for standard lathe projects, the 4-jaw chuck is considered the accessory that could add the most versatility to your machine. If you feel the 4-jaw chuck would be more useful, and you have no need for the 3-jaw chuck, any lathe “A” package can be ordered with the 4-jaw chuck substituted for the 3-jaw upon request. A clamping groove allows the chuck to hold parts for milling. Chucks for Sherline and Other Lathes The chuck is available in several spindle threads for use on Sherline (3/4-16) and other machines such as old Unimat lathes (12mm x 1mm and 14mm x 1mm) or Sears 6″ lathes (1/2-20) Like the Sherline 3-jaw chucks, the 4-jaw chucks clamp either externally or internally. The spindle thread for this 2.5 chuck is 3/4-16 to Sherline branded machines. A hex key will tighten each jaw individually. Tommy bars are used in the holes in the side to tighten and loosen the chuck for more leverage. A groove is around the base of the chuck so that angle clamps can mount it to the table of a mill as a holding fixture. Chuck Diameter: 2.5″ Jaw Capacity: With jaws in normal position: 3/32″ (2mm) – 1-3/16″ (30mm). With jaws in reverse position: 3/32″ (2mm) – 2-1/4″ (56mm) Through Hole Diameter: .687″ (17mm) Thread Size (each sold separately): P/N 1044 – 3/4-16 (fits Sherline), P/N 1071 – 12mm x 1mm (fits Unimat SL 1000), P/N 1073 – 1/2-20 (fits Old Sears 6″ Lathes), P/N 1035 – 14mm x 1mm (fits Unimat 3 or Cowells) Chuck Body Material: 12L14 Steel Chuck Jaws Material: 12L14 Case Hardened Steel Shipping Delivery time: To keep shipping costs as low as possible we ship USPS Ground (7-10 day) Payment We accept the following payment methods: Paypal Service International Shipments: We cannot guarantee any specific delivery times.

Frequently Asked Questions About Sherline 2.5 Inch 4 Jaw Chuck (Independent) 3/4 x 16 Thread 1044 in My Website

digitalmarketgame.com is the best online shopping platform where you can buy Sherline 2.5 Inch 4 Jaw Chuck (Independent) 3/4 x 16 Thread 1044 from renowned brand(s). digitalmarketgame.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Sherline 2.5 Inch 4 Jaw Chuck (Independent) 3/4 x 16 Thread 1044 on digitalmarketgame.com?

Frequently Asked Questions About Sherline 2.5 Inch 4 Jaw Chuck (Independent) 3/4 x 16 Thread 1044 in My Website

What are the best-selling Sherline 2.5 Inch 4 Jaw Chuck (Independent) 3/4 x 16 Thread 1044 on digitalmarketgame.com?

Leave a Reply Cancel reply